Описание
BETAFPV Nano receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance. A ton of ExpressLRS items are available now! For micro drones, high recommend the smaller Lite receiver. Recommend ExpressLRS Recovery Dongle for unbricking the receiver. Specification Weight: 0.7g (receiver only) Size: 12mm*19mm Telemetry power: 20dbm (100mW, 2.4G Version) Frequency bands (Nano receiver 2.4G version): 2.4GHz ISM Frequency bands (Nano receiver 915MHz/868MHz version): 915MHz FCC/868MHz EU Input voltage: 5V Antenna connector: IPEX MHF BETAFPV ExpressLRS Receivers Choosing a suitable receiver to fly quadcopter or other RC models is very important. BETAFPV ExpressLRS Receivers including ELRS Lite, Nano, Micro, and the newest SuperD, greatly fulfill pilots' requirements for FPV flying. SuperD RX Micro RX Nano RX Lite RX Weight 1.1g (RX only) 3.5g (RX only) 0.7g (RX only) 0.47g (Tower), 0.53g (Flat) Antenna IPEX MHF + T antenna IPEX MHF + T antenna IPEX MHF + T antenna SMD ceramic antenna MCU ESP32-PICO-D4, dual SX1280 ESP8285 ESP8285 ESP8285 RF Chip Dual SX1280 + Dual PA SX128X SX1280 + PA, SX1276 + PA SX128X Frequency 2.4GHz ISM 2.4GHz ISM 2.4GHz ISM, 915MHz (FCC), 868MHz (EU) 2.4GHz ISM Telemetry Power 100mW 17mW 100mW 17mW Serial Output Protocol CRSF PWM or CRSF CRSF CRSF Model Type FPV Drone, Fixed-wing aircraft Fixed-wing aircraft, Helicopter, RC Cars, RC Boats FPV Drone Whoop Drone Diagram Nano receiver 2.4G version diagram as shown below. Nano receiver 868MHz/915MHz version diagram as shown below. Note: Now the firmware version of the Nano receiver and module manufactured by our company is ELRS 3.3.0.;ELRS Innovative team has officially released version 1.0.0, based on the version, we have some updates: 2.4G Nano TX Module supports 500Hz refresh ra